These pumps can be used for more viscous liquids and oils. Polypropylene and Stainless Steel: For applications that require the ability to achieve higher head, pump more viscous liquids, or heavier liquids. Aluminum: For oil transfer from a 55 gallon drum or IBC (tote) to a reservoir or tank. Oils may include motor oil to 1200 cps, compressor oil, heat transfer oil, mineral oil, transmission fluid, machine tool coolant, degreasers, and more. It should not be used in any location where fire or explosive hazards may exist.
- Polypropylene have a hastelloy C shaft & a polypropylene impeller
- Aluminum & SS have a 316 SS shaft & a ETFE impeller
- PP has a 3/4" hose connector & aluminum & SS have a 1" connector
- 1.07 HP, 115v, 800 watt, 60 Hz, double insulated, open drip proof, air cooled, universal motor
- Motor has bipolar on/off switch with single pole thermal over current release & 16' cord & plug
- Maximum specific gravity: 2.0
- Maximum viscosity: 1200 cps (PP & aluminum) & 1100 cps (SS)
- Maximum head: 69' (PP & aluminum) & 66' (SS)
- Flow rate: 24 GPM (PP & aluminum) & 28.5 GPM (SS)
- Maximum temperature:122°F (PP) & 212°F (aluminum & SS)