SMC 215 Series 1/8" Brass Check Valves

The 215 Piston Check Valve incorporates a piston with an embedded O-ring that seals on the seat. Pressure in the flow direction moves the piston and seal off the seat and exposes the cross holes in the piston. The flow arrow on the body will point from inlet to outlet.

Brass body & piston
Viton™ or Buna-N seals
Beryllium copper retainer
Good for a wide range of air & fluid applications
0.197" diameter through-hole in the ball
Positive seal at low back pressure or slight vacuum
Cracking pressure: 1/3 psi or 1 psi
Maximum pressure: 500 psi
Maximum temperature: 250°F (Buna-N) & 375°F (Viton™)

Item #	Description	Catalog Pg.	Price
Item 22452	1/8" FNPT x 1/8" FNPT Series 215 Brass Check Valve with Buna-N Series - 1 PSI 14.59/Each In Stock Save 5% when you buy 10+ Save 10% when you buy 20+ Save 15% when you buy 60+	Internet Only	14.59/Each In Stock
Item 22453	1/8" FNPT x 1/8" FNPT Series 215 Brass Check Valve with Buna-N Series - 1/3 PSI 14.59/Each Out of Stock (On Order) Save 5% when you buy 10+ Save 10% when you buy 20+ Save 15% when you buy 60+	Internet Only	14.59/Each Out of Stock (On Order)
Item 22454	1/8" FNPT x 1/8" FNPT Series 215 Brass Check Valve with Viton™ Series - 1 PSI 15.7/Each Special Order Save 5% when you buy 10+ Save 10% when you buy 20+ Save 15% when you buy 60+	Internet Only	15.7/Each Special Order
Item 22455	1/8" FNPT x 1/8" FNPT Series 215 Brass Check Valve with Viton™ Series - 1/3 PSI 15.7/Each Special Order Save 5% when you buy 10+ Save 10% when you buy 20+ Save 15% when you buy 60+	Internet Only	15.7/Each Special Order

Note: Product testing for individual applications is recommended before use. U.S. Plastic Corp. cannot be held liable for individual application failures.

SMC 215 Series 1/8" Brass Check Valves

More in This Category