Secondary Heating Pad for Syringe Heater Kit

This secondary heating pad works with the Syringe Heater Kit, sold separately, for syringes that require temperature-controlled dispensing up to 185°C. Note: Each syringe heater control unit uses only the primary heating pad to sense temperature; all secondary heater pads connected to the same control unit will function according to the temperature on the primary heater pad. Use separate control units with primary heater pads for different temperatures or variable environments. Careful consideration should be taken when using secondary heater pads. Plugging more than 12 syringe heater pads onto one controller is not recommended. In countries where the voltage is above 130V, you must acquire a step-down transformer. Allocate 50 watts of power for each pad.

• Fits standard-size syringes over 10mL
• 120VAC, 33 watts
• Heating pad dimensions: 3-1/2" L x 3" W; Cord dimensions: 54cm L
• Heats up to 185°C
• Additional heat protection for the pump may be needed when heating syringes above 100°C
• Heating pads are not interchangeable between models
• Syringe heater kit with control unit & primary pad, syringe pump & syringes sold separately