The Little Giant MD-SC series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersible use. Pumping heads are easily rotated, cleaned, or serviced with no special tools required. The spindle shaft is supported at both ends to prevent impeller damage during the start-up and stop of the pump. Use for the circulation of moderately corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other moderately corrosive chemicals and solutions that are compatible with the pump's material of construction.
- Glass-filled polypropylene pumping head, impeller & encapsulated drive magnet
- 99.5% pure alumina ceramic shaft & thrust washers for long, trouble-free service
- Nitrile O-ring (95054 & 95055 have FKM O-rings)
- Up to 1.1 specific gravity & 100 SSU (20CPS) viscosity
- Not self-priming
- Has a 6' cord with a 3-prong plug except 5.5 MD & 6 MD, which have a conduit box & must be wired
- Motors are thermal protected
- Maximum temperature: 150°F (fluid) & 77°F (ambient air)