1/8" PVC Fluid Presence Sensor

Item #: 88446
In Stock
$129.55/Each

Buy in Quantity & Save!

2-3$123.07Save 5%
4-11$116.60Save 10%
12+$110.12Save 15%

Overview

Series FPS provides low voltage signal and when liquid is present in non-pressurized piping or components. In most applications, it is recommended to remove, clean, and reinstall the detector once the sensor is triggered. In the event that the sensing points are damaged by a highly aggressive chemical, the detector section can be easily replaced. Suitable for any conductive liquid with a resistance less than 3 Megohm. Low DC voltage control wire signals presence of liquid. IP67 DIN Connector with 2M molded cordset included.1/4" Connection; 1/8" optional for use with Fail-Dry®. Ideal for leak detection, water sensing, relief tanks, any non-pressurized location where the system operator must be alerted to the unexpected presence of liquid.

  • Suitable for any conductive liquid with a resistance less than 3 Megohm
  • Low DC voltage control wire signals presence of liquid
  • IP67 DIN Connector with 2M molded cordset included
  • 1/4" connection; 1/8" optional for use with Fail-Dry®

Item Information

Item Number:88446
Catalog Page Number:Internet Only
Weight:0.534
Manufacturer:Plast-O-Matic
Manufacturer Part #:FPS013-PV

Tech Specs

See More Like This

Information Assistance


Please enter the number that should appear between these two numbers.
655 657
Send Message