FAQ Video
FAQ Video

Replacement Black Spout Assembly for 2.2 Gallon or 5 Gallon SureCan®

Item 18706

9.97/Each
Add to Cart

Buy in Quantity & Save!

5% off at 6+9.4715/Each
10% off at 12+8.973/Each
15% off at 36+8.4745/Each

Overview

These replacement parts fit SureCan® fuel and utility containers. The spout assemblies fit any 2.2-gallon or 5-gallon SureCan® container. To replace the spout assembly: 1. Pry the locking pin up with a small screwdriver, careful not to damage the can wall. 2. Loosen the nut. 3. Grab the spout elbow, twist, and pull the assembly away from the body of the can. 4. Lubricate O-rings on the new assembly. 5. Insert the end of the spout assembly into the valve opening. Press straight into the valve opening until fully seated. 6. Hand-tighten the nut and then wrench-tighten until the pin reaches the 1 O'clock position, being careful not to over-tighten or cross threads. 7. Press the locking pin down.

  • Spout assembly
  • Fits 2.2-gallon or 5-gallon SureCan® fuel & utility cans
  • Cans sold separately

Videos

FAQ Video
FAQ Video

Item Information

Item Number: 18706
Catalog Page Number: P-NEW
Manufacturer: SureCan
Manufacturer Part #: RP004
Country of Origin: USA

Tech Specs

Weight: 0.1 lbs

More in This Group

Product Assistance

522 524
Send Message