2-1/2" OD x 1-1/2" ID Nylatron® 907 PA6 Natural Tube

Item 47616
113.43/26" Length

Buy in Quantity & Save!

5% off at 2+107.7585/26" Length
10% off at 4+102.087/26" Length
15% off at 12+96.4155/26" Length

Overview

Nylatron® 907 PA6 is an unmodified cast nylon 6 engineering material that combines high mechanical strength, stiffness, hardness, and toughness with excellent wear resistance and good machinability. Its low friction, good sliding properties, and fatigue resistance make it particularly well-suited for bearings, bushings, wear pads, rollers, gears, sleeves, and other machined components. Under appropriate low-PV conditions, it can be used as a bearing material without lubrication and offers a lightweight alternative to bronze, brass, steel, aluminum, and other traditional materials. Nylatron® 907 PA6 also offers excellent vibration damping, good creep and heat-aging resistance, and electrical insulating properties. Its combination of durability, machinability, and dimensional stability makes it suitable for a wide range of industrial, mechanical, food-processing, and equipment-fabrication applications. NOTE: Tube is oversized on the OD and undersized on the ID for machining purposes.

  • Unmodified cast polyamide 6 (PA6) nylon
  • Good fatigue, creep & heat-aging resistance
  • Excellent vibration damping & good electrical insulation
  • Good machinability; Resistant to gamma & X-ray radiation
  • OD oversized & ID undersized for machining purposes
  • Hardness: Rockwell: M88; Shore D: 80
  • Service temperature range: -30°C to 90°C (-22°F to 194°F)
  • FDA-compliant resin/materials
  • Cut tolerance: ±1/4"
  • Priced per length; sold in 26" lengths - 26" standard length

Item Information

Item Number: 47616
Catalog Page Number: P-489
Manufacturer: Cast Nylons
Manufacturer Part #: USP 47616
Country of Origin: USA

Tech Specs

Color: Natural
Form: Round Tube
Outside Dimension: 2-1/2"
Inside Dimension: 1-1/2"
Length: 26"
Weight: 4.4 lbs

Product testing for individual applications is recommended before use. U.S. Plastic Corp. cannot be held liable for individual application failures.

More in This Group

Product Assistance

302 304
Send Message