1" x 1/8" Fibergrate Dynaform® Gray Round Tube
1" x 1/8" Fibergrate Dynaform® Gray Round Tube

1" x 1/8" Fibergrate Dynaform® Gray Round Tube

Item #: 48465
On Order
$3.53/Foot
Sold in intervals of 10
- +
Add to Cart

Buy in Quantity & Save!

40-79$3.35Save 5%
80-239$3.18Save 10%
240+$3.00Save 15%

Overview

A proprietary isophthalic polyester resin formulation offering resistance to a wide range of chemicals. All shapes except the solid square and rod also also provide a low flame spread rating of 25 or less (when tested according to ASTM E-84). Fibergrate Dynaform™ pultruded fiberglass structural shapes are used in a wide range of applications, providing a unique combination of corrosion resistance, high strength, dimensional stability and light weight, along with thermal and electric non-conductivity. Provides years of low maintenance service in areas where steel, aluminum or wood components were traditionally specified. Max. working temp. 150°F. Often used in highly corrosive applications where stainless steel and other expensive components were once required. UV resistant. Solid rod does not provide low flame/spread ratings. Gray, unless otherwise stated. Corrosion resistance - providing long life in aggressive acidic or caustic environments. Lightweight and high strength - allowing for more dependable support-to-weight ratio than steel. Dimensional stability - maintaining the cross-section of structural shapes based on a low coefficient of thermal expansion. Non-conductivity - adding to personnel safety. Electromagnetic transparency - providing no impediment to the transmission of radio and microwave frequencies Tolerances: Angles: thickness +/- 10%, width and depth +/- 5%. Channels: thickness +/- 10%, width and depth +/- 5%. I-Beams: thickness +/- 10%, width and depth +/- 5%. Round and square tube: thickness +/- 15%, O.D. under 2" +/- .020", 2" and up +/-.040". Round and square bar: O.D. +/- .010". Standard length is 20'. Priced per foot; sold in 10' intervals only.

  • UV resistant proprietary isophthalic polyester resin
  • Low coefficient of thermal expansion
  • Corrosion resistant; withstands acids & caustics
  • Non-conductive; adds to personnel safety
  • Lightweight & high strength; more dependable support-to-weight ratio than steel
  • Electromagnetic transparency
  • Provides a low flame spread rating of 25 or less (tested to ASTM E-84)
  • OD tolerance: ±.020" (±15% on thickness)
  • Maximum temperture: 150°F
  • 20' lengths - priced per foot; sold in 10' intervals

Item Information

Item Number:48465
Catalog Page Number:P-375
Manufacturer Part #:1624100

Tech Specs

Weight: 0.25 lbs

See More Like This

Information Assistance


Please enter the number that should appear between these two numbers.
742 744
Send Message