1" x 24" x 48" Phenolic Grade LE Sheet

Item #: 45495



Phenolic is a hard, dense material made by applying heat and pressure to layers of paper or fabric, impregnated with a synthetic resin. These phenolics are approx half the weight of aluminum and their physical toughness resists abrasion, friction, impact, and material fatigue. Special properties fight off the corrosive action of water and many chemicals, increasing the service life and efficiency of your product parts. The insulating qualities of each grade, such as low dissipation factor and excellent dielectric strength, make them valuable for many precise electrical and electronic applications.

  • Brown color
  • Fine weave cotton fabric base, weighing not over 4 oz./sq. yd.
  • Good resistance, dissipation factor & other electrical properties
  • High tensile, compressive, flexural & impact strength
  • Machines cleanly & easily
  • Excellent application for fine-tooth gears & other similar precision par
  • High strength-to-weight ratio
  • Impact strength (ASTM D732): 1.5 ft. lb/in. of notch
  • Moisture absorption rate: 1.3%
  • Maximum temperature: 275°F

Item Information

Item Number: 45495
Catalog Page Number: P-398
Manufacturer Part #: CUT
Country of Origin: USA

Tech Specs

Material: Phenolic
Form: Sheet
Length: 48"
Width: 24"
Thickness: 1"
Weight: 61.1 lbs

More in This Group

Similar Products

Information Assistance

Please enter the number that should appear between these two numbers.
231 233
Send Message