Instructions and Maintenance for the Heavy Duty Electric Mixers
Part Numbers: 15201, 15202, 15231, and 15232
Assembly instructions: Remove the backplate from the electric motor and install the electric cord leads according to the instructions supplied with the motor for low voltage. Replace the motor backplate.
Using the 4 - 5/16” X 1” carriage bolts with nuts and washers bolt the motor to the motor bracket plate. Using the 1/2” X 3” bolt with nut and washer, bolt aluminum C-clamp to the motor bracket plate. Attach motor coupling to the motor shaft and tighten the two set screws. Insert the 1/2" diameter shaft into the coupling and tighten the two set screws. Attach the propellers to the mixer shaft. The mixer is now ready for use. Note: the mixer shaft should be kept at least 2” from the bottom of the mixing container.
Maintenance: follow the maintenance instructions for the motor that are supplied by the motor manufacture.
Replacement parts are available for these mixers. For help with replacement parts please contact us.
Title: How do I assemble my Heavy Duty Electric Mixer?
Description: Instructions and Maintenance for the Heavy Duty Electric Mixers
Last Edited: 9/18/2013
The information contained in this article is for general information purposes only. The information is provided by
United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or
warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with
respect to the website or the information, products, services, or related graphics contained on the website for any purpose.
Any reliance you place on such information is therefore strictly at your own risk.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss
or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of,
or in connection with, the use of this information.