These are the motor that are used on our Fiberglass Lab Blowers 37200 and 37201
. The part number for just the Open Drip-proof motor is #970163 and for the Explosion proof Motor is #970170.
Explosion-proof Motor: Hazardous location, Capacitor Start Totally Enclosed Fan Cooled Motor, HP 1/3, RPM 1725, Voltage 115/230 V, NEMA Frame 56, Service Factor1.00, Frequency 60 HZ, Mounting Rigid, Bearings Double Shielded Ball, Thermal Protection Automatic, Full Load Amps 7.6/3.8, Meets NEC Hazardous Atmosphere Class 1 Group C and D And Class 2 Groups E, F, and G, Rotation CW/CCW, Shaft Diameter 5/8”, Shaft Length: 1-7/8”
Open Drip-proof Motor: Belt Drive Motor, Split Phase, Open Drip-proof, 1/3 HP, 1725 RPM, Number of speeds 1, 115 Volt, 6.6 Full load Amps, 56 NEMA Frame, Service Factor 1.35, 60 Hz, Cradle Mount. Sleeve Bearings, Auto Thermal Protection. Rotation CW/CCW, Ambient 40° C, Insulation Class B, Shaft Diameter 5/8”, Shaft Length 1-7/8”, Body Diameter 5-5/8”
The information contained in this article is for general information purposes only. The information is provided by
United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or
warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with
respect to the website or the information, products, services, or related graphics contained on the website for any purpose.
Any reliance you place on such information is therefore strictly at your own risk.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss
or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of,
or in connection with, the use of this information.