← Back to Articles

Motor specifications for the 23100 mixer.

Mixer #: 23100
USP Motor #: 970129
Motor #: 2M033

Technical Specifications

  • Item: Universal AC/DC Motor
  • Enclosure: Open
  • HP: 1/15
  • Nameplate RPM: 5000
  • Nema/IEC Frame: Nonstandard
  • Voltage: 115
  • Hz: 60
  • Phase: 1
  • Full Load Amps: 1.2
  • Mounting: Hole
  • Mounting Holes: Two #10-32
  • O.C. Mounting (In): 2-3/16”
  • Thermal Protection: None
  • Insulation Class: A
  • Service Factor: 1.00
  • Bearings: Sleeve
  • Ambient (C): 40
  • Rotation: CCWSE
  • Shaft Diameter (In.):1/4”
  • Shaft Length (In.): 3/4"
  • Length Less Shaft (In): 4-7/16”
  • Body Diameter (In): 2-3/4”
  • Finish: Gray Hammer
  • Average Brush Life (Hr): 300
  • Standards: UL Recognized (E47479)
  • Title: Motor specifications for the 23100 mixer.
    Description: 970129 Motor Specifications
    Published: 7/2/2008
    Last Edited: 1/17/2023

    Was this article useful to you?

    Share

    Information disclaimer:

    The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

    In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.