Physical Properties for Sanatec® HDPE (Cutting Board Material)

Sanatec® Typical Properties( Cutting Board Material)

Property

Units

Value(1)

ASTM Method

Physical

ASTM Type, Class, Category

Density

Environmental Stress Crack resistance, F50

 

Hardness

 

-

g/cm3

hrs.

hrs.

Shore D

 

IV,A,4

0.960

-

-

68

 

D1248

D1505

D1693

D2561

D2240

Mechanical

Tensile Strength @ Break

Elongation at break

Flexural Modulus

1% Secant Modules

Tensile Impact, (2)

 

psi

%

psi

psi

ft-lb/in

 

4,400

>600

220,000

-

100

 

D638

D638

D790

D790

D1822

Thermal

Low Temperature Brittleness, F50

Heat Deflection Temperature @ 66 psi

Vicat Softening Point

 

°C

°C

°C

 

<-76

78

125

 

D746

D648

D1525

Sanetec® meets the standard established by Food and Drug Regulation 21 CFR 177.52 for all food contact, USDA, a

nd the Department of Canada Agriculture.

 

1 Physical properties of plastic sheeting are represented as "Typical". Information contained herein is considered

accurate to the best of our knowledge. It is offered for your consideration and investigation, and is not to be construed

 as a representation or warranty expressed or implied. Our warranties are limited to those expressly stated in formal

contracts or in conditions of sale on our invoices and order acceptances. Conditions and methods of use may vary and

 are beyond the control of Compression Polymers Corp., therefore, Compression Polymers Corp. disclaims any liability

 incurred as a result of the use of this product in accordance with the data contained in our physical property charts.

No information herein shall be construed as an offer of indemnity for infringement or as a recommendation to use the

 products in such a manner as to infringe any patent, domestic or foreign.

The "Typical" properties of our plastic sheet cannot be automatically used when engineering finished components; and

the fabricator or end user is responsible for insuring the suitability of our products for their specific application or end use!

Article Title:
Physical Properties for Sanatec® HDPE (Cutting Board Material)
Article Summary:
Physical, Mechanical, and Thermal Typical Properties.
Article Date:
1/22/2009
Article ID:
543
2 user(s) found this article useful. Was this article useful to you?
Share

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.