Physical Properties for Clear Polyester Mylar Film

Clear Polyester Mylar Film

Specifications

Units

Typical Value

Tensile Strength

PSI

29,000

Elongation at Break

%

135 (1 mil to 5 mil)

145 (7 mil)

150(10 mil)

170 (14 mil)

Shrinkage MD/TD

%

1.7/1.2 (1 mil to 2 mil)

1.5/0.5 (3 mil to 10 mil)

1.3/0.8 (14 mil)

Yield

Ft2/lb.

150 (1 mil)

69 (2 mil)

46 (3 mil)

34 (4 mil)

28 (5 mil)

20 (7 mil)

14 (10 mil)

10 (14 mil)

88 – 89 % Light Transmission
NOTE: The values given are believed to be accurate and typical for clear polyester film. All values are given as a

matter of information only. Polymer Marketing suggests the customer confirm these values and product compatibility

prior to its use. We make no guarantee and accept no responsibility as to the suitability of the product for any particular

use.

Article Title:
Physical Properties for Clear Polyester Mylar Film
Article Summary:
Typical Properties
Article Date:
2/4/2009
Article ID:
559
3 user(s) found this article useful. Was this article useful to you?
Share

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.