Petro Hylar ™ PVDF Tubing
General Property Profile of Hylar Polymers
|
Property |
Method |
Units |
Typical Values or Ranges 1 |
|
Physical Properties
Melting Point Range
Specific Gravity
Refractive Index
Water Absorption |
ASTM D3418
ASTM D542
ASTM D570 |
°F
°C
°25D
% |
320
160
1.75 – 1.77
1.42
0.04 |
|
Mechanical Properties
Tensile Strength at Yield
Tensile Strength at Break
Elongation at Yield
Elongation at Break
Tensile Modulus
Flexural modulus
Impact Strength at Room Temperature
Unnotched
Notched
Hardness |
ASTM D638
ASTM D638
ASTM D638
ASTM D638
ASTM D882
ASTM D790
ASTM D256
ASTM D2240 |
psi
psi
%
%
psi
psi
ft-lb/in
ft-lb/in
Shore D |
6,000 – 6,500
5,000 – 7,500
8 – 15
50 – 250
150 – 200 X 103
165 – 200 X 103
15 – 40
2 – 4
75 – 80 |
|
Thermal Properties
Limiting Oxygen Index
Vertical Burn |
ASTM D2863
UL Bulletin 94 |
% |
43
V-0 |
1. The above information is believed to be accurate, but offers no guarantees or warranties of any kind with regard to its suitability
for particular requirements.
Title: Physical Properties for Hylar ™ PVDF Tubing
Description: Physical, Mechanical, and Thermal Typical Properties.
Published: 2/10/2009
Last Edited: 9/18/2013
Information disclaimer:
The information contained in this article is for general information purposes only. The information is provided by
United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or
warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with
respect to the website or the information, products, services, or related graphics contained on the website for any purpose.
Any reliance you place on such information is therefore strictly at your own risk.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss
or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of,
or in connection with, the use of this information.