← Back to Articles

Physical Properties for Polypropylene Rod

Versadur ® Polypropylene Rod
Homopolymer PP
Standard and Specifications
-       ASTM D-4101 Group I Class I Grade I
-          FDA regulations Title 21 CFR 177.1520 (C1.1)
-          Federal Specification LP-394B Type I (GP) Type III Grade IIIA Class III
-          USDA approval for direct contact with meat and poultry products
-          Military standard D/N/A
-          UV Radiation Exposure 500 hours no visible change
-       California Proposition 65 - Safe Drinking Water and Toxic ebforcement Act - Passes

Property

Test Method ASTM*

Unit

Typical Value

Physical

Density

D-792

g/cc

0.91

Mechanical

Tensile strength

Flexural Modulus

Elongation at Yield (73°F/0.126 in.)

Izod Impact

Rock Hardness

D-638

D-256

D-785

psi

ft/lbs/in

“R” scale

4,900

210,000

10.5

1.5

Thermal

Heat Distortion Temperature

@66 psi

@264 psi

Coefficient of Thermal Expansion (30°C to 60°C)

D-648

°F

in/in/°C

210

120

14.5 X 10^-5

Electrical

Volume Resistivity

D-257

ohm X cm

> 10¹⁶

* American Society of Testing Materials
Data and information used the preparation of this sheet have been obtained from controlled laboratory procedures
and/or carefully controlled documented empirical observations. As such, they may not be applicable to all uses and
conditions. The reader is advised that no guarantee, written or implied, including guarantees as to the fitness for a
particular purpose or use, are to be construed from this bulletin. Persons with questions as to the applicability of
this material, or Simona America products to specific uses or situations are urged to contact our customer service
department.

Search More Articles

Title: Physical Properties for Polypropylene Rod
Description: Physical, Mechanical, and Electrical Typical Properties.
Published: 2/17/2009
Last Edited: 9/18/2013

1 user found this article useful. Was this article useful to you?

Yes

Share

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.