← Back to Articles

Physical Properties for Cast Acrylic Tube

General Information on the Cast Acrylic Tubes:

PropertiesComments
ASTM Specifications D5436
Impact Strength .5ft lbs/in of notch
Dielectric Strength 400 volt/mil
Durometer Rockwell M98
Coefficient of Thermal Expansion 4.9 X 10 m/m/F
Weather Resistant Yes, material is UV absorbing
Machinability Yes, care must be taken to avoid heat build-up
Scratch Resistant No
Use With Chemicals mild solutions, weak acids
Do Not Use With chlorinated hydrocarbons, alcohols, esters, and ketones
Color Clear Transparent
Temperature Range 0°F to 150°F
Melt Point 220°F
FDA Certification FDA CFR Title 21 177.1010
UL Rating UL 94HB
Title: Physical Properties for Cast Acrylic Tube
Description: Physical, Mechanical, and Electrical Typical Properties.
Published: 3/4/2009
Last Edited: 1/6/2023

9 users found this article useful. Was this article useful to you?

Share

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.