Can Nalgene products be autoclaved?

Below is a list of materials than can be autoclaved at 121° C, 15 PSIG for 20 minutes. You should clean and rinse the items with distilled water before autoclaving. Always completely disengage threads before autoclaving.
 
Plastic Type Autoclavable
Polypropylene Yes
Polymethylpentene Yes
Polycarbonate Yes
Polysulfone Yes
ETFE Yes
FEP Yes
PTFE Yes
HDPE No
LDPE No
Polystyrene No
PET No
FLPE No
Article Title:
Can Nalgene products be autoclaved?
Article Summary:
A list of Nalgene materials that can be autoclaved.
Article Date:
11/21/2007
Article ID:
750
2 user(s) found this article useful. Was this article useful to you?
Share

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.