← Back to Articles

What do I use to cut HDPE?

Carbide-tipped tools are best as they are long-lasting and achieve high productivity rates on HDPE. High-speed steel is adequate, also.

Fast-running band and circular saws are suitable for cutting HDPE. The cut surface can be smooth, and a good finish can result when the teeth are lightly set. Saw blades with teeth no more the15mm apart have been shown to produce a better quality cut.

Title: What do I use to cut HDPE?
Description: Information on cutting HDPE.
Published: 11/23/2007
Last Edited: 1/16/2023

25 users found this article useful. Was this article useful to you?

Share

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.