< Back to Articles

Can I use the exterior male thread on a bulkhead fitting to connect to?

No, you cannot connect to this thread. It is a straight thread designed for the nut to go onto holding the fitting in the wall of the tank. All connections go on the inner part of the bulkhead which is usually FNPT (female national pipe thread). Bulkhead
Title: Can I use the exterior male thread on a bulkhead fitting to connect to?
Description: How to connect to bulkhead fittings.
Published: 11/26/2007
Last Edited: 5/4/2012
4 users found this article useful. Was this article useful to you?

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.