Which is the finest mesh size, 600 micron or 100 micron?

100 micron is finer then the 600 micron. They measure the holes in the mesh in microns, so the higher the number the larger the holes. 100 micron mesh holes are .003925” compared to 600 micron mesh which is .023550”. 400 micron mesh has .015700” holes and 200 micron mesh has .007850” holes.

Article Title:
Which is the finest mesh size, 600 micron or 100 micron?
Article Summary:
Dimensional information on the size holes in our EZ-strainers.
Article Date:
1/15/2008
Article ID:
789
40 user(s) found this article useful. Was this article useful to you?
Share

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.