The standard valves connect to your supply line with Male Pipe Thread. The tank mount will also connect to the supply line with Male Pipe Thread, but they have a thread with a locking nut and gasket to mount them in the tank wall. To install the tank mount, you must drill a hole in your tank the size of the thread on the valve and then thread on the nut to secure it on the tank wall. This leaves you with a Male Pipe Thread outside the tank to connect your supply line.
Title: What is the difference between standard and tank mount on the Heavy Duty PVC Float valves?
Description: Mounting information for the Heavy Duty PVC Float valves.
Published: 1/15/2008
Last Edited: 1/17/2023
Information disclaimer:
The information contained in this article is for general information purposes only. The information is provided by
United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or
warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with
respect to the website or the information, products, services, or related graphics contained on the website for any purpose.
Any reliance you place on such information is therefore strictly at your own risk.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss
or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of,
or in connection with, the use of this information.