Our manufacturing department is able to weld fittings into the Tamco Polyethylene and Polypropylene tanks that we stock here. Normally what we install are the Bossweld fittings which just have regular parts numbers (listed below). To be quoted on a tank with one of these fittings you just need to include a drawing or instructions for fitting location and size.
900134 - 1/2" Polyethylene welded in Boss fitting
900141 - 3/4" Polyethylene welded in Boss fitting
900142 - 1" Polyethylene welded in Boss fitting
970179 - 1-1/2" Polyethylene welded in Boss fitting
970178 - 3" Polyethylene welded in Boss fitting
970112 - 3/4" Polypropylene welded in Boss fitting
These are also available loose, if you want to weld them in yourself.
We are also able to have polyethylene and polypropylene barbed fittings and polypropylene couplings welded into the Tamco Polyethylene and Polypropylene tanks. There are no part numbers for these and they would have to be quoted by the quotes department. Their email is firstname.lastname@example.org.
Title: Can USP weld a fitting onto any of the tanks?
Description: Our manufacturing department is able to weld fittings into the Tamco tanks.
Last Edited: 5/4/2012
The information contained in this article is for general information purposes only. The information is provided by
United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or
warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with
respect to the website or the information, products, services, or related graphics contained on the website for any purpose.
Any reliance you place on such information is therefore strictly at your own risk.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss
or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of,
or in connection with, the use of this information.