← Back to Articles

Will U.S. Plastic Corp.® cut the acrylic tube and rod?

Unfortunately, we do not cut the cast or extruded acrylic tube and rods to length. We have had too many problems with the acrylic getting scratched during cutting, and we no longer offer to cut these items.

These items can be cut to length by the end user. We suggest fine-toothed, carbide-tipped blades for the best cuts.

The extruded tube and rods are sold in 6' lengths.

The cast tube is sold in 5' lengths.

1/4" to 2" cast rods are sold in 4' lengths, and 2-1/4" to 3" cast rods are sold in 6' lengths.

All pricing is per foot.

Title: Will U.S. Plastic Corp.® cut the acrylic tube and rod?
Description: Why we do not cut the acrylic rod and tube
Published: 11/16/2011
Last Edited: 1/16/2023
3 users found this article useful. Was this article useful to you?

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.