It is listed under the Underwriters' Laboratories File No. E197675. Available 1/4" through 2". All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. No disassembly is required. Instead, the installer pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or connect the connector into an NPT threaded hole). No threading of the conduit or tubing is required to install, eliminating the possibility of cutting the pipe and creating leak paths. The complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning clockwise. Suitable for indoor/outdoor use for original equipment manufacturers or field installers. Lower installed cost.
- Molded of nylon 6
- Flammability Classification: UL 94 V2
- Temperature index: 125°C
- O-ring & steel locknut included
- Dimensions: 2.00" L x 1.4" W