0.170" ID x 1/4" OD x 0.040" Wall Bev-a-line XX® Tubing

Item 56285

9.5 for 10 Feet (0.95/Foot)

Sold in increments of 10 feet. Shipped in full pieces up to the standard length listed in the product overview below unless specified in your order comments.

These items are temporarily out of stock. Placing an order for one of these items will put you in line to receive your shipment on a first-come, first-served basis. In most cases, you may choose to accept partial shipments during checkout. You may also sign up below to be notified when it is back in stock.

Add to Cart Get Notified

Buy in Quantity & Save!

5% off at 50+	0.9025/Foot
10% off at 100+	0.855/Foot
15% off at 300+	0.8075/Foot

Overview

Bev-A-Line XX® has a patented Hytrel® liner that is virtually inseparable from its shell and it has a sturdy, but flexible, outer shell with a smooth inner lining that offers resistance to abrasion, chemical attack and next-batch contamination. The tubing is gas permeable and withstands repeated autoclaving without separation of layers. The co-extruded construction offers savings in installation over conventional braided profiles. The Hytrel® liner is comparable to poly-ether based urethanes in regards to moisture permeability. With its low permeability, Bev-A-Line XX® also works with refrigerant gases and hydrocarbons.

Autoclavable
Durometer hardness (Shore D): 55 (liner); 80 (outer shell)
Temperature range: -60°F to 160°F
Brittleness temperature: -51°F (liner); -41°F (outer shell)
Specific gravity: 1.20 (liner & outer shell)
Elongation at break: 450% (liner); 400% (outer shell)
Tensile strength: 5200 psi (liner); 2000 psi (outer shell)
Working pressure @ 70°F: 130 psi
Meets FDA & NSF standards
Priced per foot, sold in 10' intervals - 500' standard length