Little Giant® HC Series Magnetic Drive Pumps for Highly Corrosive Chemicals

The Little Giant MD-HC series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersible use. Pumping heads are easily rotated, cleaned, or serviced with no special tools required. The spindle shaft is supported at both ends to prevent impeller damage during the start-up and stop of the pump. For use in the circulation of highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other highly corrosive chemicals and solutions that are compatible with the pump's material of construction.

• Glass-filled PPS pumping heads & impeller & PPS encapsulated drive magnet
• Carbon impeller bushing, self-lubricating
• Ceramic shaft & thrust washer
• FKM O-rings
• Up to 1.1 specific gravity & 100 SSU (20 CPS) viscosity
• Not self-priming
• 50/60 Hz, 1 phase motors with thermal protector (95063 is 3 phase)
• 2-MD, 3-MD, 4-MD & 5-MD have a 6' cord with 3-prong plug; others have a conduit box & must be wired
• Operating pressure: 60 psig
• Maximum temperature: 200°F (fluid) & 77°F (ambient air)