Designed specifically for e-liquid use, the wide selection of bottles & caps will not shatter or break if dropped. Filling is quick and easy.
These round buckets are tough enough to store nails and secure enough to protect contents. They have strong reinforcing ribs for strength and a space-saving, tapered design allows pails to nest.
Designed with durability in mind, our Jumbo Totes can handle large loads and were made to withstand the rigors of storage and transportation in an industrial environment.
We carry carry hose barb fittings in a variety of materials suitable for all sorts of applications.
These beakers are low cost, unbreakable and exhibit high corrosion resistance.
We carry a complete line of polyethylene sheet, rod and shapes. Sheets can be heat formed, shaped and welded to fabricate ducts, hoods and much more.
We carry a large selection of American-made Tamco® industrial strength tanks.
This broad range of flexible Tygon® tubing products are engineered to meet many user specifications including chemical resistance, fluctuations in temperature, abrasion, high purity and long service life.
Property
Units
Value(1)
ASTM Method
Physical
Specific Gravity
Water Absorption
Rockwell Hardness
Cell Class
g/cm³
%
R Scale
-
1.42
0.06
115
12454-B
D-792
D -570
D-785
D-1784
Mechanical
Tensile Modulus
Yield Strength
Flexural Modulus
Izod Impact
psi
ft-lb/in
411,000
7,500
481,000
12,800
1.0
D-638
D-790
D-256
Thermal
Vicat Softening Point
Heat Deflection Temperature @ 66 psi
Heat Deflection Temperature @ 264 psi
Linear Coefficient of Expansion
° C/°F
in/in/°C
83/181
82/179
80/176
5.8 X10 -5
3.2 X 10-5
D-1525
D-648
D-696
Flammability ratings
Flammability
Flame Spread
Self-extinguishing
0
15
D-635
UL 94V
E 84
Electrical
Electrical Volume Resistivity
Dielectric Constant
Dissipation Factor
Loss Index
Dielectric Strength
Ohm/cm
60 Hz
60Hz
Volts/mil
5.4 X 1015
3.19
0.0096
0.030
544
D-257
D-150
D-149
1Physical properties of plastic sheeting are represented as " Typical". Information herein is considered to the best of our knowledge.It is offered for your consideration and investigation, and is not to be construed as a representation or warranty expressed or implied. Our warranties are limited to those expressly stated in formal contracts or in conditions of sale on our invoices and order acceptances. Conditions and methods of use may vary and are beyond the control of Vycom Corp.; therefore, Vycom Corp. disclaims any liability incurred as a result of the use of this product in accordance with the data contained in our physical property charts. No information herein shall be construed as an offer of indemnity for infringement or as a recommendation to use the products in such a manner as to infringe any patent, domestic or foreign.The "Typical" properties of our plastic sheet cannot be automatically used when engineering finished components; and the fabricator or end user is responsible for insuring the suitability of our products for their specific application or end use!
Information disclaimer:
The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.