← Back to Articles

Physical Properties for ABS Sheet

General Purpose ABS (SP-900)
PropertyTest MethodValueUnit
Specific GravityASTM D-7921.04psi
Tensile ModulusASTM D-638310,000psi
Tensile Strength @ YieldASTM D-6386,000psi
Flexural ModulusASTM D-790640,000psi
Flexural Strength @ YieldASTM D-79010,000psi
Izod impactASTM D-256
Falling Dart ImpactASTM D-3029
Heat Deflection TemperatureASTM D-648
(264psi unannealed)
Coefficient of Thermal ExpansionASTM D-6964.1 X 10-5in/in/°F
HardnessASTM D-785105Rockwell R
FlammabilityUL Subject 94HB0.062”
Gardener GlossASTM D-52398%

These typical results are based on test procedures which are believed to be reliable. Due to variable conditions or methods of processing. NO GARANTEES OR WARANTEIS ARE EXPRESSED OR IMPLIED INCLUDING WARRANTY OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, nor for recommendations made to infringe on patents.

Title: Physical Properties for ABS Sheet
Description: Physical, Mechanical, and Thermal Typical Properties.
Published: 1/23/2009
Last Edited: 1/6/2023
2 users found this article useful. Was this article useful to you?

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.