I need a specific size plastic cutting board. Can I cut the board myself?

We offer color coded 1/2 " thick HDPE cutting boards in 6 colors and in a wide variety of pre-cut sizes. High density polyethylene material is stress-relieved to provide a flat sheet and is manufactured from prime resins for a pure colored sheet with superior properties. There is a textured surface on both sides to prevent knife slippage. Each sheet is reversible to ensure an extended product life. The specially-desinged textured surface will not dull knife blades. The non-absorbent and non-porous sheet will not allow liquids, odors, or bacteria to penetrate the surface. It resists acids and stains, and can easily be cleaned with soap and hot water. It will not chip, crack, or splinter, meets FDA specifications, and is accepted by USDA. The working temp is -60 deg F to 180 deg F. It is not UV stabilized.

If you need a custom size and wish to cut it yourself, these are our recommendations: We recommend that you use a carbide tip blade and circular saw, or a hand saber or jig saw.

Article Title:
I need a specific size plastic cutting board. Can I cut the board myself?
Article Summary:
Customizing our HDPE acrylic color coded cutting board material
Article Date:
Article ID:
2 user(s) found this article useful. Was this article useful to you?

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.