Thickness tolerances for Acrylic sheet

Here are the tolerances on the thickness of the acrylic sheets that we offer. Sizes 1/16” – 3/8” are the extruded sheets and the 1/2”, 3/4”, and 1” are the cast sheets. 

Thickness in Inches

Thickness in Millimeter

Minimum - Maximum

0.060” (1/16”)

1.5 mm

0.054” – 0.066”

0.080” (5/64”)

2.0 mm

0.072” – 0.088”

0.098” (1/10”)

2.5 mm

0.088” – 0.108”

0.118” (1/8”)

3.0 mm

0.106” – 0.130”

0.177” (3/16”)

4.5 mm

0.168” – 0.186”

0.236” (1/4”)

6.0 mm

0.224” – 0.248”

0.354” (3/8”)

9.0 mm

0.336” – 0.372”

0.472” (1/2”)

12.0 mm

0.397”  - 0.507”

0.708” (3/4”)

18.0 mm

0.619” – 0.749”

0.944” (1”)

24.0 mm

0.833” – 0.993”

Article Title:
Thickness tolerances for Acrylic sheet
Article Summary:
Minimum and Maximum thickness tolerances for our Acrylic sheet.
Article Date:
12/7/2007
Article ID:
768
12 user(s) found this article useful. Was this article useful to you?
Share

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.