< Back to Articles

1. Cut tubing to desired length.

2. Loosen nut, insert tube. (your pre-assembled fitting should be ready for use)

3. Tighten nut finger-tight.

4. Your fitting is now ready for use.


No tools are required, but if you decide to use a mechanical device to tighten it, rotate the nut no more than one turn past finger-tight.
Title: Installation instructions for the for the Pharmafluor™ PFA Compression fittings.
Description: Basic instructions on tightening the compression nuts.
Published: 2/23/2010
Last Edited: 9/18/2013
Was this article useful to you?

Information disclaimer:

The information contained in this article is for general information purposes only. The information is provided by United States Plastic Corp. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of materials, time or profits arising out of, or in connection with, the use of this information.